Chapter 4
| System Management Commands
System Status
– 123 –
show users Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The session used to execute this command is indicated by a “*” symbol next to the
Line (i.e., session) index number.
Example
Console#show users
User Name Accounts:
User Name Privilege Public-Key
-------------------------------- --------- ----------
admin 15 None
guest 0 None
steve 15 RSA
Online Users:
Line User Name Idle time (h:m:s) Remote IP addr
------- -------------------------------- ----------------- ---------------
*console admin 0:14:14
VTY 0 admin 0:00:00 192.168.1.19
SSH 1 steve 0:00:06 192.168.1.19
Web Online Users:
Line User Name Idle time (h:m:s) Remote IP Addr
----- -------------------------------- ----------------- ---------------
HTTP admin 0:00:06 192.168.0.99
Console#
show version This command displays hardware and software version information for the system.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show version
Unit 1
Serial Number : 571054X1452023
Hardware Version : R01A
EPLD Version : 05/05/05
Number of Ports : 54
Main Power Status : Up
Redundant Power Status : Down
Role : Master
Loader Version : 1.4.0.5
Linux Kernel Version : 3.8.13-rt9-QorIQ-SD
To Next Page
Loading...
Need help?
General