Chapter 29
| IP Routing Commands
Global Routing Configuration
– 815 –
next-header (IPv6 Hash) This command adds the next header hash attribute to the hash selection list. Use
the no form to remove the specified attribute.
Syntax
[no] next-header
Command Mode
IPv6 hash selection mode
Command Usage
The next header identifies the type of header immediately following the IPv6
header.
Example
Console(config)#hash-selection list 3 ipv6
Console(config-ipv4-hash-sel)#next-header
Console#
src-l4-port (IPv6 Hash) This command adds the source Layer 4 protocol port hash attribute to the hash
selection list. Use the no form to remove the specified attribute.
Syntax
[no] src-l4-port
Command Mode
IPv6 hash selection mode
Example
Console(config)#hash-selection list 3 ipv6
Console(config-ipv4-hash-sel)#src-l4-port
Console#
vlan (IPv6 Hash) This command adds the VLAN hash attribute to the hash selection list. Use the no
form to remove the specified attribute.
Syntax
[no] vlan
Command Mode
IPv6 hash selection mode
To Next Page
Loading...
Need help?
General