Chapter 20
| Quality of Service Commands
– 543 –
show policy-map
interface
This command displays the service policy assigned to the specified interface.
Syntax
show policy-map interface interface {input | output}
interface
unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
input
- Apply to the input traffic.
output - Apply to the output traffic.
Command Mode
Privileged Exec
Example
Console#show policy-map interface 1/5 input
Service-policy rd-policy
Console#
To Next Page
Loading...
Need help?
General