Edge-Core AS5700-54X - Show Ip Igmp Snooping

Chapter 22 | Multicast Filtering Commands
IGMP Snooping
– 600 –
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Example
Console#clear ip igmp snooping statistics
Console#
show ip igmp
snooping
This command shows the IGMP snooping, proxy, and query configuration settings.
Syntax
show ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (1-4094)
Command Mode
Privileged Exec
Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP Snooping : Enabled
Router Port Expire Time : 300 s
Router Alert Check : Disabled
Router Port Mode : Forward
TCN Flood : Disabled
TCN Query Solicit : Disabled
Unregistered Data Flood : Disabled
802.1p Forwarding Priority : Disabled
Unsolicited Report Interval : 400 s
Version Exclusive : Disabled
Version : 2
Proxy Reporting : Enabled
Querier : Disabled
VLAN 1:
--------
IGMP Snooping : Enabled
IGMP Snooping Running Status : Inactive
Version : Using global version (2)
Version Exclusive : Using global status (Disabled)
Immediate Leave : Disabled
Last Member Query Interval : 10 (1/10s)
Last Member Query Count : 2
General Query Suppression : Disabled
Query Interval : 125
Query Response Interval : 100 (1/10s)
Proxy Query Address : 0.0.0.0
Proxy Reporting : Using global status (Enabled)
Multicast Router Discovery : Enabled
VLAN Static Group Port