Chapter 16
| Address Table Commands
– 441 –
show mac-address-
table count
This command shows the number of MAC addresses used and the number of
available MAC addresses for the overall system or for an interface.
Syntax
show mac-address-table count interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table count interface ethernet 1/1
MAC Entries for Eth 1/2
Total Address Count :0
Static Address Count :0
Dynamic Address Count :0
Console#
To Next Page
Loading...
Need help?
General