Chapter 19
| Class of Service Commands
Priority Commands (Layer 3 and 4)
– 521 –
show qos map
cos-dscp
This command shows ingress CoS/CFI to internal DSCP map.
Syntax
show qos map cos-dscp interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
Command Mode
Privileged Exec
Example
Console#show qos map cos-dscp interface ethernet 1/5
CoS Information of Eth 1/5
CoS-DSCP map.(x,y),x: phb,y: drop precedence:
CoS : CFI 0 1
---------------------------------
0 (0,0) (0,1)
1 (1,0) (1,1)
2 (2,0) (2,1)
3 (3,0) (3,1)
4 (4,0) (4,1)
5 (5,0) (5,1)
6 (6,0) (6,1)
7 (7,0) (7,1)
Console#
show map default-
drop-precedence
This command shows the per-hop behavior to default drop precedence for
untagged ingress packets.
Syntax
show qos map default-drop-precedence interface interface
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General