Chapter 4
| System Management Commands
Time
– 174 –
b-month - The month when summer time will begin. (Options: january |
february | march | april | may | june | july | august | september | october
| november | december)
b-hour - The hour when summer time will begin. (Range: 0-23 hours)
b-minute - The minute when summer time will begin. (Range: 0-59 minutes)
e-week - The week of the month when summer time will end. (Range: 1-5)
e-day - The day of the week summer time will end. (Options: sunday |
monday | tuesday | wednesday | thursday | friday | saturday)
e-month - The month when summer time will end. (Options: january |
february | march | april | may | june | july | august | september | october
| november | december)
e-hour - The hour when summer time will end. (Range: 0-23 hours)
e-minute - The minute when summer time will end. (Range: 0-59 minutes)
offset - Summer-time offset from the regular time zone, in minutes.
(Range: 0-99 minutes)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
â—† In some countries or regions, clocks are adjusted through the summer months
so that afternoons have more daylight and mornings have less. This is known as
Summer Time, or Daylight Savings Time (DST). Typically, clocks are adjusted
forward one hour at the start of spring and then adjusted backward in autumn.
â—† This command sets the summer-time zone relative to the currently configured
time zone. To display a time corresponding to your local time when summer
time is in effect, you must indicate the number of minutes your summer-time
zone deviates from your regular time zone.
Example
The following example sets a recurring 60 minute offset summer-time to begin on
the Friday of the 1st week of March at 01:59 hours and summer time to end on the
Saturday of the 2nd week of November at 01:59 hours.
Console(config)#clock summer-time MESZ recurring 1 friday march 01 59 2
saturday november 1 59 60
Console(config)#
Related Commands
show sntp (166)
To Next Page
Loading...
Need help?
General