Chapter 1
| Initial Switch Configuration
Connecting to the Switch
– 60 –
Current Status:
Link Status : Down
Link Down Reason : Invalid License or Trial License
Operation Speed-duplex : 10G full
Flow Control Type : None
Max Frame Size : 1522 bytes (1522 bytes for tagged frames)
MAC Learning Status : Enabled
To order a licence, you must provide the following information to your distributor:
◆ Switch model number (AOS5700-54X or AOS6700-32X)
◆ System MAC address. Enter the “show system” command from the craft port to
display this information.
Console#show system
System Description : AOS5700-54X
System OID String : 1.3.6.1.4.1.259.12.1.2.101
System Information
System Up Time : 0 days, 1 hours, 22 minutes, and 57.7 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 70-72-CF-EA-1B-71
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
...
To install a license, first verify that the craft port is configured with a valid IP address
using the “show interface” command. If no information is displayed for the craft
interface, use the ”ip address” command to configure the IP address for the craft
port as shown in the following example:
Console#configure
Console(config)#interface craft
Console(config-if)#ip address 192.168.0.200 255.255.255.0
Console(config-if)#
Download the corresponding license file as shown in the following example. Note
that the license file is named according to the device MAC address. The network
ports will be automatically activated within two minutes after successful
installation.
Console#copy tftp file
TFTP server IP address: 192.168.0.102
Choose file type:
1. config; 2. opcode; 3. license: 3
Source file name: 7072CFEB9CE4.lic
To Next Page
Loading...
Need help?
General