Chapter 23
| LLDP Commands
– 654 –
lldp basic-tlv
system-description
Configures an LLDP-enabled port to advertise the
system description
IC
lldp basic-tlv
system-name
Configures an LLDP-enabled port to advertise its
system name
IC
lldp dcbx-tlv ets-config Configures an LLDP-enabled port to advertise ETS
configuration settings
IC
lldp dcbx-tlv
ets-recommend
Configures an LLDP-enabled port to advertise ETS
recommendation information
IC
lldp dcbx-tlv pfc-config Configures an LLDP-enabled port to advertise PFC
configuration settings
IC
lldp dot1-tlv proto-ident
*
Configures an LLDP-enabled port to advertise the
supported protocols
IC
lldp dot1-tlv proto-vid
*
Configures an LLDP-enabled port to advertise port-
based protocol related VLAN information
IC
lldp dot1-tlv pvid
*
Configures an LLDP-enabled port to advertise its
default VLAN ID
IC
lldp dot1-tlv vlan-name
*
Configures an LLDP-enabled port to advertise its
VLAN name
IC
lldp dot3-tlv link-agg Configures an LLDP-enabled port to advertise its
link aggregation capabilities
IC
lldp dot3-tlv mac-phy Configures an LLDP-enabled port to advertise its
MAC and physical layer specifications
IC
lldp dot3-tlv max-frame Configures an LLDP-enabled port to advertise its
maximum frame size
IC
lldp med-location civic-
addr
Configures an LLDP-MED-enabled port to advertise
its location identification details
IC
lldp med-notification Enables the transmission of SNMP trap notifications
about LLDP-MED changes
IC
lldp med-tlv inventory Configures an LLDP-MED-enabled port to advertise
its inventory identification details
IC
lldp med-tlv location Configures an LLDP-MED-enabled port to advertise
its location identification details
IC
lldp med-tlv med-cap Configures an LLDP-MED-enabled port to advertise
its Media Endpoint Device capabilities
IC
lldp med-tlv network-
policy
Configures an LLDP-MED-enabled port to advertise
its network policy configuration
IC
lldp notification Enables the transmission of SNMP trap notifications
about LLDP changes
IC
show lldp config Shows LLDP configuration settings for all ports PE
show lldp info
local-device
Shows LLDP global and interface-specific
configuration settings for this device
PE
Table 131: LLDP Commands (Continued)
Command Function Mode