Chapter 29
| IP Routing Commands
Global Routing Configuration
– 811 –
Example
Console(config)#hash-selection list 1 mac
Console(config-mac-hash-sel)#ethertype
Console#
src-mac (MAC Hash) This command adds the source-mac address hash attribute to the hash selection
list. Use the no form to remove the specified attribute.
Syntax
[no] src-mac
Command Mode
MAC hash selection mode
Example
Console(config)#hash-selection list 1 mac
Console(config-mac-hash-sel)#src-mac
Console#
vlan (MAC Hash) This command adds the VLAN hash attribute to the hash selection list. Use the no
form to remove the specified attribute.
Syntax
[no] vlan
Command Mode
MAC hash selection mode
Example
Console(config)#hash-selection list 1 mac
Console(config-mac-hash-sel)#vlan
Console#
dst-ip (IPv4 Hash) This command adds the destination IPv4 address hash attribute to the hash
selection list. Use the no form to remove the specified attribute.
Syntax
[no] dst-ip
Command Mode
IPv4 hash selection mode