Chapter 2
| Using the Command Line Interface
Entering Commands
– 91 –
MSTP spanning-tree mst-configuration Console(config-mstp) 449
Policy Map policy-map Console(config-pmap) 531
Route Map route-map Console(config-route-map) 993
Router router { bgp | ipv6 ospf | ospf } pim } pim6 | rip Console(config-router) 908
882
839
1022
1047
820
Time Range
time-range Console(config-time-range) 178
VLAN vlan database Console(config-vlan) 472
Table 5: Configuration Command Modes (Continued)
Mode Command Prompt Page
To Next Page
Loading...
