Chapter 29
| IP Routing Commands
Border Gateway Protocol (BGPv4)
– 921 –
neighbor prefix-list Configures prefix restrictions applied in inbound/
outbound route updates to/from specified neighbors
RC
neighbor remote-as Configures a neighbor and its AS number, identifying the
neighbor as a local AS member
RC
neighbor remove-private-
as
Removes private autonomous system numbers from
outbound routing updates to an external neighbor
RC
neighbor route-map Specifies the route mapping policy for inbound/outbound
routing updates for specified neighbors
RC
neighbor route-reflector-
client
Configures this router as a route reflector and the specified
neighbor as its client
RC
neighbor route-server-
client
Configures this router as a route server and the specified
neighbor as its client
RC
neighbor send-community Configures the router to send community attributes to a
neighbor in peering messages
RC
neighbor shutdown Closes a neighbor connection without canceling the
neighbor configuration
RC
neighbor soft-
reconfiguration inbound
Configures the switch to store updates in the inbound
message buffer, and perform soft re-configuration from
this buffer for specified neighbors when required
RC
neighbor strict-capability-
match
Forces strict capability matching when establishing
connections
RC
neighbor timers Sets the Keep Alive time and Hold time used for specified
neighbors
RC
neighbor timers connect Sets the time to wait before attempting to reconnect to a
neighbor whose TCP connection has failed
RC
neighbor unsuppress-map Allows specified suppressed routes to be advertised RC
neighbor update-source Specifies the interface to use for a connection, instead of
using the nearest interface
RC
neighbor weight Assigns a weight to a neighbor connection RC
Display Information
show ip bgp Shows entries in the routing table PE
show ip bgp attribute-info Shows internal attribute information PE
show ip bgp cidr-only Shows routes which use classless inter-domain routing
network masks
show ip bgp community Shows routes that belong to specified BGP communities PE
show ip bgp community-
info
Shows permitted community messages PE
show ip bgp community-list Shows the routes matching a community-list PE
show ip bgp dampening Shows dampened routes PE
show ip bgp filter-list Shows routes matching the specified filter list PE
show ip bgp neighbors Shows connection information for neighbor sessions PE
show ip bgp paths Shows all paths in the database PE
Table 185: Border Gateway Protocol Commands – Version 4 (Continued)
Command Function Mode
To Next Page
Loading...
Need help?
General