Enterasys Matrix E1 1G694-13 User Manual

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
A-6 Matrix E1 Series (1G694-13) Configuration Guide
mirroring (show port)
Displays the source and target ports for mirroring, and whether
mirroring is currently enabled or disabled for those ports. For details,
refer to Section 4.2.8.1.
show port mirroring
negotiation (set port)
Enables or disables the auto-negotiation protocol on one or more
ports. For details, refer to Section 4.2.3.2.
set port negotiation port_string {disable | enable}
negotiation (show port)
Displays the status of the auto-negotiation protocol on one or more
ports
. For details, refer to Section 4.2.3.1.
show port negotiation [port_string]
netstat (show)
Displays statistics for the device’s active network connections. For
details, refer to Section 9.2.2.7.
show netstat [icmp | interface | ip | routes | stats | tcp | udp ]
password (set)
Sets the login password and access policy (Read-Write or Read-Only)
on the CLI. For details, refer to Section 3.2.1.1.
set password {rw | ro}
ping
Sends ICMP echo-request packets to another node on the network.
For details, refer to Section 9.2.2.8.
ping {hostname [packet_count] | -s hostname}
port ingress filter
(set)
Limits the forwarding of received VLAN tagged frames on a port to
the frames with VLAN IDs that match that port’s membership on port
VLAN egress lists. For details, refer to Section 6.2.3.5.
set port ingress filter port_string {enable | disable}
port ingress filter
(show)
Displays ports enabled for port ingress filtering. For details, refer to
Section 6.2.3.4.
show port ingress filter [port_string]
port priority (clear)
Resets the current 802.1D port priority setting to 0. For details, refer
to Section 7.2.1.3.
clear port priority port_string
CLI Task Command Function and Syntax

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English