Enterasys Matrix E1 1G694-13 User Manual

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
A-8 Matrix E1 Series (1G694-13) Configuration Guide
RMON stats (show)
Displays RMON (Remote Monitoring) statistics for one or more
ports. For details, refer to Section 9.2.2.9.
show rmon stats [port_string]
Spanning Tree (set)
Globally enables or disables the Spanning Tree algorithm on the
switch. For details, refer to Section 5.2.1.2.
set spantree {disable | enable}
Spanning Tree (show)
Displays Spanning Tree information. For details, refer to
Section 5.2.1.1.
show spantree stats [active | port port_string]
Spanning Tree blocked
ports (show)
Displays Spanning Tree blocked ports. For details, refer to
Section 5.2.2.2.
show spantree blockedports
Spanning Tree edge port
(set)
Sets the edge port administrative status for a Spanning Tree port. For
details, refer to Section 5.2.2.8.
set spantree adminedge port_string {true | false}
Spanning Tree edge port
(show)
Displays the edge port administrative status for a Spanning Tree port.
For details, refer to Section 5.2.2.7.
show spantree adminedge port_string
Spanning Tree edge port
delay (set)
Enables or disables the edge port delay function, which causes an edge
port to delay (by 2 “hello” periods) moving to a forwarding state. For
details, refer to Section 5.2.1.10.
set spantree edgeportdelay {disable | enable}
Spanning Tree edge port
delay (show)
Displays the status of the edge port delay function. For details, refer to
Section 5.2.1.9.
show spantree edgeportdelay
Spanning Tree forward
delay (set)
Sets the Spanning Tree forward delay. This is the maximum time (in
seconds) the root device will wait before changing states (i.e.,
listening to learning to forwarding). For details, refer to
Section 5.2.1.8.
set spantree fwddelay delay
CLI Task Command Function and Syntax

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English