Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
Matrix E1 Series (1G694-13) Configuration Guide A-9
Spanning Tree hello (set)
Sets the Spanning Tree hello time, This is the time interval (in seconds)
the device will transmit BPDUs indicating it is active. For details, refer
to Section 5.2.1.6.
set spantree hello internal
Spanning Tree legacy
path cost (set)
Enables or disables legacy (802.1D) path cost values. For details,
refer to Section 5.2.1.12.
set spantree legacypathcost {disable | enable}
Spanning Tree legacy
path cost (show)
Displays the administrative status of the legacy (802.1D) path cost
setting. For details, refer to Section 5.2.1.11.
show spantree legacypathcost
Spanning Tree maximum
aging time (set)
Sets the Spanning Tree maximum aging time. This is the maximum
time (in seconds) the device can wait without receiving a
configuration message (bridge “hello”) before attempting to
reconfigure. For details, refer to Section 5.2.1.7.
set spantree maxage agingtime
Spanning Tree
point-to-point (set)
Sets the administrative point-to-point status of the LAN segment
attached to a Spanning Tree port. For details, refer to Section 5.2.2.10.
set spantree adminpoint port_string {true | false | auto}
Spanning Tree
point-to-point (show)
Displays the administrative point-to-point status of the LAN segment
attached to a port. For details, refer to Section 5.2.2.9.
show spantree adminpoint port_string
Spanning Tree port cost
(set)
Assigns a cost value to a Spanning Tree port. This parameter is used to
determine the best path between Spanning Tree devices. For details,
refer to Section 5.2.2.6.
set spantree portcost port_string cost
Spanning Tree port cost
(show)
Displays cost values assigned to one or more Spanning Tree ports. For
details, refer to Section 5.2.2.5.
show spantree portcost port_string
CLI Task Command Function and Syntax
To Next Page
Loading...
Need help?
General