Enterasys Matrix E1 1G694-13 User Manual

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
Matrix E1 Series (1G694-13) Configuration Guide A-11
Spanning Tree topology
change trap suppress
(show)
Displays the status of topology change trap suppression on Rapid
Spanning Tree edge ports. For details, refer to Section 5.2.1.13.
show spantree tctrapsuppress
Spanning Tree version
(set)
Sets the version of the Spanning Tree protocol to RSTP (Rapid
Spanning Tree Protocol) or to STP 802.1D-compatible. For details,
refer to Section 5.2.1.4.
set spantree version {rstp | stpcompatible}
Spanning Tree version
(show)
Displays the current version of the Spanning Tree protocol running on
the device. For details, refer to Section 5.2.1.3.
show spantree version
status (show port)
Displays port operating status, duplex mode, speed and port type, and
statistical information about traffic received and transmitted through
one or all ports on the device. For details, refer to Section 4.2.1.1.
show port status [port_string]
system (show)
Displays system information, including operating status, baud rate,
uptime, system name, location and contact name. For details, refer to
Section 3.2.2.1.
show system
system baud (set)
Sets the console port baud rate. For details, refer to Section 3.2.2.9.
set system baud rate
system contact (set)
Sets a contact person for the system. For details, refer to
Section 3.2.2.7.
set system contact “contact_string”
system location (set)
Sets a location for the system. For details, refer to Section 3.2.2.6.
set system location “location_string”
system name (set)
Sets a name for the system. For details, refer to Section 3.2.2.5.
set system name “name_string”
CLI Task Command Function and Syntax

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English