Enterasys Matrix E1 1G694-13 User Manual

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
A-12 Matrix E1 Series (1G694-13) Configuration Guide
terminal (set)
Sets the number of columns and rows of the display terminal
connected to the console port of the device. This information is used
to control the output of the CLI itself. For details, refer to
Section 3.2.2.8.
set terminal {rows num_rows | cols num_cols}
time (set)
Changes the time of day on the system clock. For details, refer to
Section 3.2.2.3.
set time [day_of_week][mm/dd/yyyy][hh:mm:ss]
time (show)
Displays the current time of day in the system clock. For details, refer
to Section 3.2.2.2.
show time
trap (clear)
Deletes an SNMP trap assigned to an IP address. For details, refer to
Section 3.2.5.3.
clear trap ip_address
trap (set)
Sets an SNMP trap assigned to an IP address. For details, refer to
Section 3.2.5.2.
set trap ip_ address community_name {enable | disable}
trap (show)
Displays SNMP trap configuration information. For details, refer to
Section 3.2.5.1.
show trap
trap (set port)
Enables or disables an SNMP link trap for one or more ports. For
details, refer to Section 4.2.6.2.
set port trap port_string {enable | disable}
trap (show port)
Displays the status of an SNMP link trap for one or more ports. For
details, refer to Section 4.2.6.1.
show port trap [port_string]
trunk (clear)
Deletes a trunk from the device. For details, refer to Section 4.2.10.3.
clear trunk [trunk_name]
CLI Task Command Function and Syntax

Enterasys Matrix E1 1G694-13 Specifications

General

Brand	Enterasys
Model	Matrix E1 1G694-13
Category	Switch
Language	English