Ericsson iPECS-100 - Flexible Numbering Plan

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
108
2.39 FLEXIBLE NUMBERING PLAN
Description
User access to the iPECS system resources and features is accomplished through feature
codes or iPECS Phone buttons. The Administrator selects from one of the eight (8) different
standard numbering plans and, if desired, assigns codes for individual functions in the Flexible
Numbering Plan. The feature codes are defined in the system’s Flexible Numbering Plan; refer
to Appendix section 4.2 of the iPECS Admin and Programming Manual.
Operation
System
System implements feature activation based on the Flexible Numbering Plan.
Conditions
1. Feature codes can be one to three digits in length.
2. During programming, conflicts in the Numbering Plan are not allowed. The existing
non-conflicting Numbering Plan is used until correctly updated.
Programming
SYSTEM ID
1
System Id (PGM 100-Btn 4)
NUMBERING
1
Flexible Station Numbering Plan (PGM 105)
Related Features
2
Flexible Numbering Plan (PGM 106 – 109)
Hardware