iPECS-LIK
Feature Description & Operation Manual
Conditions
1. If no new/old messages are available, pressing “1” or “2”, is an invalid operation and
the user receives the “Invalid Entry” prompt or “No Message” prompt.
2. If the dialed number is not recognized, the "Invalid Entry" prompt is played. After the
second invalid entry, the user is disconnected.
3. The user may dial digits at any time during a voice mail playback, system prompt or
silence. The user must dial a digit in response to a system prompt within the CCR
Analysis timer or the system will disconnect and return error tone.
4. Messages can be retrieved in either a FIFO (First in First out) or LIFO (Last in First
out) order to meet the desire of each user.
5. In Admin, VSF is used as the single reference for a parameter that applies to both
the VSF and the VMIM.
6. If user set auto save new message and hear new message, it’s saved automatically
Programming
STATION 1 Retrieve Message Order (PGM 113-Btn 13)
2 Auto save new message (PGM 161-Btn 24-11)
Related Features
Message Retrieval Options
Remote Message Retrieval
Multiple Voice Mailbox Support
Hardware
VSF and/or VMIM
2.73.3.3 Remote Message Retrieval
Description
The system permits remote users access to their mailbox. After accessing the VMIM/VSF
Voice Mail, operation follows the local procedures.
Operation
Remote Caller
To access Voice Mailbox from a remote location
1. Lift the handset.
2. Dial the telephone number of a DISA assigned CO line assigned for answer by a
VMIM/VSF Auto Attd.
3. Upon answer, dial “#” to receive the “Request for Mail Box number” prompt.
4. Follow local access procedures.
Conditions
1. The conditions associated with Message Retrieval and Message Retrieval Options
To Next Page
Loading...