Ericsson iPECS-100 - 2.57 MOH (MUSIC-ON-HOLD)

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
117
Related Features
 Call Transfer, CO/IP
 Hold Preference
 Hold Recall
 Exclusive Hold
Hardware
2.42.5 Automatic Hold
Description
While on an active CO/IP call, the system will place the call on hold automatically if the user
presses the [FLASH], [CONF], {DSS/BLF} or other feature buttons. In addition, the station can
be programmed to support CO/IP to CO/IP Automatic Hold. In this case, pressing a CO/IP
button while on a CO/IP call will place the active call on hold and access the selected CO/IP
line.
Operation
iPECS Phone
To use Automatic Hold while on an active CO/IP call
1. Press the desired feature button or {CO}/{IP}; the active call is placed in the
Preferred Hold state.
Conditions
1. CO/IP lines placed on hold with Automatic Hold are placed in the assigned
Preferred Hold.
2. There is no limit on the number of calls that can be placed on hold using Automatic
Hold.
Programming
STATION 1 Automatic Hold (PGM 112-Btn 2)
SYSTEM 2 Hold Preference (PGM 160-Btn 7)
Related Features
 Hold Preference
 Hold Recall
Hardware
 iPECS Phone