iPECS-LIK
Feature Description & Operation Manual
3.6
INTERCOM STEP CALL
Description
When busy tone is received on a dialed Intercom call, the user may place a call to another
station by dialing the last digit of the station number. The system replaces the last digit of the
previously dialed busy station with the dialed digit and places an Intercom call to the new
station number.
Operation
iPECS Phone
To activate step call, while receiving busy on a dialed Intercom call;
1. Dial a digit other than the last digit of the busy station’s intercom number.
Conditions
1. If the user dials the last digit of the busy station, Camp-On will be activated.
2. After receiving busy tone, if the user takes no action for the Busy Tone timer, 7
seconds, the system will start the Intercom Lockout procedure.
Programming
Related Features
Intercom Lock-Out
Intercom Call (ICM Call)
Hardware
To Next Page
Loading...