iPECS-LIK
Feature Description & Operation Manual
2.23
CONFERENCE
2.23.1 Conference Room
Description
In addition to ad-hoc conferencing, users may establish a Conference Room. Other internal
and external parties are invited to the conference and can join the conference without further
action by the user who established the Conference Room. A user can transfer an active call to
a Conference Room. A Conference Room can be password protected so that only parties that
enter the password are allowed to join the Room.
Up to 9 Conference Rooms can be set-up and each can support a maximum of 32 parties with
the g.711 or g.729 codec or 24 parties with the g.723 codec. Conference Rooms employ
channels from an MCIM (Multi-party Conference Interface Module). Each MCIM supports up to
32 parties and multiple MCIM units may be installed as shown in the chart below.
iPECS-50 & 100 2 MCIM units maximum
iPECS-300 4 MCIM units maximum
iPECS-600 8 MCIM units maximum
iPECS-1200 30 MCIM units maximum
Operation
Attendant Phone
To view Room participant list
1. Press the [PGM] button.
2. Dial “054”.
3. Dial Room number (1~9).
To delete a Conference Room
1. Press the [PGM] button.
2. Dial “055”.
3. Dial Room number (1~9).
iPECS Phone
To set-up a Conference Room
1. Press the [PGM] button.
2. Dial 53 to create a Conference Room.
3. Dial the desired Conference Room number (1~9).
4. If desired, enter a password for the Conference Room (must be exactly 5 digits).
5. Press [SAVE] button to establish the Room.
To join a Conference Room
1. Dial *59, the Conference Room entry code.
2. Dial the Conference Room Number.
3. Dial the Conference Room password.
To Next Page
Loading...