iPECS-LIK
Feature Description & Operation Manual
Networking Basic Attribute (PGM 320)
Networking Supplementary Attribute (PGM 321 –
BTN 1)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
2.70.2.3 Identification Service
Description
Calling Name Identification Presentation (CNIP): When a user makes a net call and a name of
station is programmed in the Station Name field (PGM+74), the system includes the name of
calling party to the called party between systems.
Operation
1. A Net Call is arrived a station with LCD display.
While ringing, the CNI will be displayed if they are included in the Setup message.
Conditions
Programming
SYSTEM 1 Network CNIP/COLP Enable (PGM 320 – BTN 3 /
BTN 4)
2.70.2.4 Call Completion
Description
There are two kinds of call completion as follows;
Completion of Calls to Busy Subscribers (CCBS):
After calling a user in another system using basic call and encountering a busy tone. A station
user can be notified when the busy destination of another system becomes idle. If the user
wants to make a call to the destination on that notification, the call can be reinitiated to the
destination of another system again.
Completion of Calls on No Reply (CCNR):
After calling a user in another system using basic call and encountering no reply. The caller can
be notified when the destination becomes an idle status after some actions. If the caller wants
to make a call to the destination, the call can be reinitiated to the destination again.
Operation
To make CCBS (Call Back)
1. Dial the station of another system that is a busy.
2. Press the [CALLBK] button while a busy tone is provided.
3. The call is cleared after a confirmation tone.
To Next Page
Loading...