iPECS-LIK
Feature Description & Operation Manual
2.26
DELAYED CO/IP RING
Description
Ring signals for an incoming CO/IP call can be sent to stations immediately upon detection or
after an assigned ring cycle delay. The delay can be up to 9 system ring cycles, thus allowing
other stations to answer the call.
Operation
System
Delay Ring operation is automatic when assigned
Conditions
1. Delay Ring can be assigned for a station or Station Group.
2. If no delay is entered when programming Ring assignments, the station will receive
immediate ring.
3. Private Lines may be assigned with delayed ring.
4. If no station or Station Group is assigned for immediate ring, the call will ring
immediately at the first available Attendant.
Programming
CO/IP 1 CO Station Ring Assignment (PGM 144)
Related Features
Private Line
Station Groups
CO/IP Ring Assignment
Hardware
To Next Page
Loading...