Ericsson iPECS-100 - 7.2 HOWLER TONE

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
338
5.26 STATION USER PROGRAMMING & CODES
Description
iPECS Phone users can program an array of functions and features, access status information
and assign special features codes to Flex buttons. The Station User Program Codes used for
these purposes are fixed as listed below.
Code
Description
Entries
10
Enblock Dial
11x
Intercom Differential Ring
1~8
12x
CO/IP Differential Ring
1~8
13
ICM Signaling Mode
1: H, 2: T, 3: P
14x
Call Coverage Attribute
1~2
15x
Station Ring Download
5~ 8 + 00~19
19
Ear Mic Headset
6000 & 7000 phones only
21
Knock down Station COS
22
Restore Station COS
Auth code
23
Walking COS
Auth code
24
ICR Scenario
Scenario Data
25
LIP Phone Statistics
Real-time Packet Monitoring
31
Station Msg Wait Retrieve
32
CLI/IP Msg Wait Retrieve
33
Register Authorization Code
Auth Code
34
DID Call Wait
35
Exec/Sec MWI
1 On, 0 Off
36
Send SMS message
37
Register Mobile Extension
tel number
38
Activate Mobile Extension
1 On, 0 Off
39
Register Mobile Ext CLI
tel number
41
Set Wake-Up Time
Once/Permanent & Hour/Min
42
Erase Wake-Up Time
51
Custom/Pre-selected Msg
00~20
52
Register Custom Msg (00)
“Msg”
53
Create Conference Room
Room number (1~9)
54
Delete Conference Room
Room number (1~0)
57
{Call Log Display} button
61
Headset/Speakerphone mode
0:H, 1:S
62
Select Headset Ring type
1:S, 2:H, 3:Both
67
{Call Coverage} button