iPECS-LIK
Feature Description & Operation Manual
2.65
STATION CALL COVERAGE
Description
The Call Coverage feature permits an iPECS Phone user to receive ring and answer calls directed
to a covered station. This feature is generally employed to allow a Secretarial answering position
to cover calls to other stations. When a covered station rings, the {CALL COVERAGE} button
LED will flash and the covering station may receive ring (immediate or delayed) for the call. The
covering station can answer the call using the {CALL COVERAGE} button, terminating ring at
other stations. Once answered, the LED of {CALL COVERAGE} buttons for the station at other
covering stations will extinguish.
Operation of this feature requires a {CALL COVERAGE} button at the covering iPECS Phone and
the covered station must activate call coverage. A station can have multiple Call Coverage buttons
each covering a different station and multiple stations can have a Call Coverage button for a given
station.
Operation
iPECS Phone
To assign a {CALL COVERAGE} button at the covering station
1. [PGM] + {FLEX} + “*67” + covered Station number + [SAVE]
To activate Call Coverage at the covered station
1. Press the [PGM] button.
2. Dial “141”, the Call Coverage code.
3. Dial “1” to enable or “0” to disable Call Coverage.
To assign ring for a {CALL COVERAGE} button
1. Press the [PGM] button.
2. Dial “142”, the Call Coverage Ring code.
3. Dial the delay in ring cycles (“0”-“9”).
When a covered station receives a call, the covering station will receive the following display:
CALL FOR STA xxxx
FROM yyyy time
Conditional Operation by Administrative Attributes
1. ‘Call Coverage On Busy’ =
OFF : Call Coverage is implemented when a covered station is on idle state
ON : Call Coverage is implemented when a covered station is on idle or busy state
2. ‘Call Coverage Through Mobile Ext’ =
OFF : Call Coverage Ring is not delivered to Mobile Extension ON : Call Coverage
Ring is not delivered to Mobile Extension
3. ‘Call Coverage On Busy Range’ =
External Call Only : Call Coverage only for external call when covered station is busy.
External and Internal Call : Call Coverage both for external & internal call when
covered station is busy.
4. ‘Call Coverage Delay Ring Method’ =
by Originator : Call Coverage Delay is implemented by covered station’ ‘Call Cover
To Next Page
Loading...