Ericsson iPECS-100 - Wake-Up Alarm (Five Time Wake up Alarm)

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
232
2.75 WAKE-UP ALARM (FIVE TIME WAKE UP ALARM)
Description
If [PGM161 – New 5 Wake Up Usage] is set to ON, then new wake-up feature is enabled. Each
station can have and set up to 5 wake-up times. Each wake-up time is identified using an id (1-
5).
Each wake-up time has a wake-up type:
1
YY/MM/DD
Alarm will be activated only one time in day specified by YY/MM/DD.
2
Mon – Fri
Alarm will be activated from Monday to Friday.
3
Mon - Sat
Alarm will be activated from Monday to Saturday.
4
Mon - Sun
Alarm will be activated every day.
Operation
To register wake-up time alarm from a Station, perform the following steps:
1. Press the [TRANS/PGM] button.
2. Dial [4] [1].
3. Enter wake-up time id: [1] … [5].
4. Dial the desired 2-digit hour (24-hour mode), then 2-digit minute for alerting.
5. Enter wake-up type: [1] … [4].
6. If wake-up type is 1 (YY/MM/DD), enter wake-up date: 2 digits for year, 2 digits for
month and 2 digits for day.
7. Press the [HOLD/SAVE] button.
To erase a wake-up time from a Station, perform the following steps:
1. Press the [TRANS/PGM] button.
2. Dial [4] [2].
3. Enter wake-up time id: [1] … [5].
4. Press the [HOLD/SAVE] button.
To register a wake-up time alarm from the Attendant Station, perform the following:
1. Press the [TRANS/PGM] button.
2. Dial [0] [4] [4].
3. Dial the station range to be alerted. If a single station is to receive the alarm, enter
“*” instead of a second station number.
4. Dial the desired 2-digit hour (24-hour mode), then 2-digit minute for alerting.
5. Enter wake-up type: [1] … [4].
6. If wake-up type is 1 (YY/MM/DD), enter wake-up date: 2 digits for year, 2 digits for
month and 2 digits for day.
7. Press the [HOLD/SAVE] button.
To erase a wake-up alarm from the Attendant Station, perform the following Steps:
1. Press the [TRANS/PGM] button.
2. Dial [0] [4] [5].