iPECS-LIK
Feature Description & Operation Manual
6.7
CALL FORWARD, ATTENDANT
Description
As with other stations, Attendants can forward calls to other stations in the system. Calls may
be forwarded unconditionally, on busy or no answer.
Operation
Attendant
To activate Call Forward
1. Lift the handset or press the [SPEAKER] button to receive intercom dial tone.
2. Press the [FWD] button.
3. Dial code “0” ~ “5”, the Call Forward type.
4. Dial the station number to receive forwarded calls.
To deactivate Call Forward
1. While idle, press the [FWD] button.
Or,
1. While Off-hook, press the [FWD] button.
2. Dial #.
Condition
1. The Conditions of the Call Forward feature apply.
2. If the System Attendant activates Unconditional Call Forward, the receiving station
will receive Attendant calls and recall ring. In addition, if the receiving station is an
iPECS Phone, the user will be able to activate features normally reserved for a Main
Attendant.
3. The system requires at least one Attendant be available. The last available
Attendant cannot activate Call Forward to an Attendant that has activated the
Alternate Attendant feature.
Programming
Related Features
Call Forward
Hardware
To Next Page
Loading...