iPECS-LIK
Feature Description & Operation Manual
3.9.2 Short Message Service (SMS)
Description
The Short Message Service (SMS) provides the ability to send and receive text messages to
and from iPECS phones equipped with a display including the Phontage, UCS Client and
WLAN Phone. The text can comprise words, numbers, or an alphanumeric combination. Each
short message can be up to 100 characters in length when Latin alphabets are used.
Users send and receive messages from their iPECS Phone or the Station Program selection in
the iPECS system Web Home Page. For operation using the iPECS system Home Page see
your System Administrator.
Operation
To assign a Flex button as a {SMS SEND} button;
1. [PGM] + {FLEX} + [PGM] + “36” + [SAVE]
To resend an existing SMS message;
1. Press the [PGM] button.
2. Dial “36”, the SMS send code.
SMS SENDING MODE RESEND-
(1) EDIT-(2)
3. Dial “1” to resend a message.
DIAL STA DEST(XXX-XXX) SKIP-
(*)
4. Dial the desired station range to receive the message or “*” to use the displayed
station range.
STA 100-124
SEND-(SAVE) CANCEL-(#)
5. Press the [SAVE] button to send the message or “#” to cancel.
To send a new message
1. Press the [PGM] button.
2. Dial “36”, the SMS send code.
SMS SENDING MODE RESEND-
(1) EDIT-(2)
3. Dial “2” to send a new message.
DIAL STA DEST(XXX-XXX)
4. Dial the desired station range to receive the message.
STA 100-124
SEND-(SAVE) CANCEL_(#)
5. Dial the message using two digits for each character as shown in the table below,
use the [REDIAL] button to delete a character.
To Next Page
Loading...