iPECS-LIK
Feature Description & Operation Manual
7.6
SLT FLASH MODE
Description
SLT Flash works as following option.
0 : Flash Transfer - Flash detected, then the line is held and the line goes to waiting state.
1 : Flash Drop - Flash detected and Line is disconnected.
2 : Flash Ignore - Flash detected, but Ignored.
3 : Hold Release - Flash detected, then the line is held and the line goes to waiting state. And
the SLT user goes on-hook, then the held line is disconnected, not recalling.
Operation
Conditions
Programming
1 PGM 113 – SLT Flash Mode
Related Features
Hardware
To Next Page
Loading...