iPECS-LIK
Feature Description & Operation Manual
2.46
IP BRIDGE MODE
Description
The Phontage and UCS client can automatically bridge the audio for a call to linked pair station.
When the Phontage or UCS client place a call in the bridged mode, the iPECS Phone is
connected to the call.
Operation
To use the IP Bridge mode:
1. Place a call from the Phontage or UCS client. The Phontage or UCS client must be
in the Bridged mode.
2. The call must be connected by lifting the handset of the linked iPECS Phone.
Conditions
1. The Phontage or UCS client must be used locally to the bridged iPECS Phone.
2. Bridged operation must be selected at the Phontage or UCS client.
3. The Phontage or UCS Phone must be linked to the associated iPECS Phone.
4. Bridging is not available from the iPECS Phone to the Phontage or UCS client.
Programming
Related Features
Linked Station Pairs
Hardware
To Next Page
Loading...