iPECS-LIK
Feature Description & Operation Manual
3.
INTERCOM
3.1 DIRECT STATION SELECT/BUSY LAMP FIELD
(DSS/BLF)
Description
When a Flex button on an iPECS Phone or DSS Console is assigned as a {DSS} button, it also
serves as a Busy Lamp Field. The LED indicates the status of the associated station or system
facility.
Operation
iPECS Phone
Operation of this feature is automatic for assigned Flex buttons.
Conditions
1. A station receiving ICM ringing is considered busy and the associated station LED
on all other stations will flash at 30 ipm.
2. A station receiving ICM ringing will receive visual indication by a flashing LED of the
Flex button associated with the calling station.
3. When a station receives a Camp-On the LED of a DSS button associated with the
calling station will flash.
4. The station is considered busy when:
in use,
receiving ICM Ring at an iPECS Phone,
receiving any ring at an SLT.
Programming
Related Features
Intercom Call (ICM Call)
Station User Programming & Codes
Hardware
To Next Page
Loading...