iPECS-LIK
Feature Description & Operation Manual
LNR (Last Number Redial)
Dial Pulse to Tone Switchover
Save Number Redial (SNR)
Speed Dial Pause Insertion
System Speed Dial
Flex Button Direct Speed Dial Assignment
Hardware
2.64.4 System Speed Dial
Description
Commonly dialed numbers can be stored by the System Attendant or by the Administrator in
Web Admin for easy access by stations allowed use of System Speed Dial bins. With the
iPECS-50 and 100, up to 800 System Speed Dial numbers may be stored. With iPECS 300
models, up to 3000 System Speed Dial numbers are available. With iPECS 600(1200) models,
up to 6000(12000) System Speed Dial numbers are available. Each Speed Dial number can be
up to 48 characters in length and may include special instruction codes.
Special instruction codes available are:
‘*’ as 1st digit Activate Display Security.
Flash as 1st digit Activate dial tone detect.
‘#’ Insert a pause dialing command.
‘*’ not 1st digit Switch from Pulse to DTMF dialing.
[MSG/CALLBK] Send as ISDN Keypad Facility IE.
[HOLD] Insert a Pulse to tone switch-over.
iPECS Phone users may assign a Flex button for One-Touch access to a specific System
Speed Dial bin.
Operation
iPECS Phone
To assign a Flex button as a {SYSTEM SPEED DIAL} button
1. [PGM] + {FLEX} + [SPEED] + System Speed Dial bin number + [SAVE]
To dial using a System Speed Dial using a [SPEED] button
1. Lift handset or press the [SPEAKER] button.
2. Press the [SPEED] button.
3. Dial the desired bin number:
iPECS-50 & 100: “200”-“999”
iPECS-300: “2000”-“4999”
iPECS-600: “2000”-“7999”
To Next Page
Loading...