Ericsson iPECS-100 - 5.13 STATION INDIVIDUAL CALL ROUTING (ICR)

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
284
4.8 DIAL PULSE SIGNALING
Description
An analog CO line will send dial pulse signals to the central office. If programmed as a pulse
CO line, the system will send open loop pulses at 10 pps with the assigned break/make ratio.
Operation
System
Operation of this feature is automatic when programmed.
Conditions
1. The break/make ratio is system programmable as 60/40 or 66/33.
Programming
CO/IP
1
CO Line Signal Type (PGM 141-Btn 5)
SYSTEM
1
Pulse Dial Ratio (PGM 176)
2
Pause Timer (PGM 181-Btn 10)
Related Features
 Dial Pulse to Tone Switchover
 DTMF Signal Sending
Hardware