iPECS-LIK
Feature Description & Operation Manual
2.14
CALL PARK
Description
A user may place an active CO/IP call in a special holding location (Park Orbit) for easy access
from any station in the system.
Operation
iPECS Phone
To park an active external call
1. Press the [TRANS] button.
2. Dial the Park Orbit.
3. Return to idle.
To retrieve a parked call
1. Lift the handset or press the [SPEAKER] button,
2. Dial the Park Orbit.
SLT
To park an active external call
1. Momentarily press the hook-switch.
2. Dial the Park Orbit.
3. Return to idle.
To retrieve a parked call
1. Lift the handset.
2. Dial the Park Orbit.
Conditions
1. If the selected Park Orbit returns a busy signal, the user may simply dial another
Park Orbit without the need to disconnect.
2. Intercom calls cannot be placed in a Park Orbit.
3. A Parked call will recall to the station that parked the call should the Call Park Timer
expire. The normal Hold Recall process is then initiated.
4. A Parked call will indicate busy at all appearances.
Programming
SYSTEM 1 Call Park Recall Timer (PGM 180-Btn 2)
Related Features
Hold Recall
Attendant Recall
Hardware
To Next Page
Loading...