Ericsson iPECS-100 - 2.29 DIAL-BY-NAME

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
62
4. CO/IP lines placed on hold may be retrieved by dialing the retrieve held CO/IP code
“8#” and the CO/IP line number.
5. The Tx path to a station will be muted until the system has verified the Toll
Restriction for the CO/IP line.
6. When a CO line is seized, the system will monitor the line for dial tone.
7. The system selects lines from a group using the Round robin or Last-choice method
based on Admin Programming.
8. When an iPECS Phone is not assigned Ringing Line Preference, the user must
press the ringing {CO}/{IP} line button to answer the call.
9. iPECS Phone users may be assigned exclusive use of a CO line as a Private Line.
Programming
STATION
1
CO/IP Line Access (PGM 112-Btn 4)
2
CO Line Programming (PGM112-Btn 6)
3
Prefer CO/GROUP (PGM112-Btn 14th)
4
CO Line Group Access (PGM 117)
CO/IP
1
CO/IP Line Group (PGM 141-Btn 1)
2
CO/IP Ring Assignment (PGM 144)
Related Features
 CO/IP Line Groups
 CO/IP Ring Assignment
 Ringing Line Preference
 Private Line
Hardware