iPECS-LIK
Feature Description & Operation Manual
6.5
ATTENDANT STATION PROGRAM CODES
Description
Using the Attendant Station Program Codes, the Attendant can print SMDR and Traffic reports
on-demand, assign Authorization Codes, control certain user features, record VMIM/VSF
announcements, enable/disable Auto Service Mode Control, etc. Items are available using the
Program Code directly or scrolling the multi-level display menu. The following indicates the
menu displays, including the digit for selecting the item, the item description and further
required entries. The various levels of the display menu are indicated by indentation. For
additional information, reference Appendix C of the iPECS Admin & Programming Manual.
Note also, some Program Codes are only available to the System Attendant or stations allowed
access to the Attendant Program code “0”.
[1] PRINT
[1] SMDR
[1] PRINT SMDR STA BASE
station range input
[2] DELETE STATION BASE
station range input
[3] DISPLY CALL CHARGE
[4] ABORT PRINTING
[5] PRINT LOST CALL
[6] DELETE LOST CALL
[2] TRAFFIC - System attendant only
[1] PRINT ALL SUMMARY
enter Analysis time & type
[2] PRINT ALL PERIDICLLY
enter Analysis time, type & Print time
[3] ABORT PERIDIC PRINTING
[4] PRINT ATD TRAFFIC
enter Analysis time & type
[5] PRINT CALL SUMMARY
[6] PRINT CALL HOUR
[7] PRINT H/W USAGE
enter Analysis time & type
[8] PRINT CO SUMMARY
enter Analysis time & type
[9] PRINT CO HOUR
enter CO group number
[2] COS
[1] SET ICM ONLY MODE
enter station range
[2] RESTORE COS
enter station range
[3] AUTHORIZATION
To Next Page
Loading...