Ericsson iPECS-100 - 3.9 MESSAGE WAIT;CALL BACK

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
230
2.74 WAKE-UP ALARM (ONE TIME WAKE UP ALARM)
Description
This feature allows a user or Attendant to set a wake-up time or desired time to be alerted.
When the time is reached, the system will signal with an audible and visual signal.
Operation
Attendant
To register Wake-Up
1. Press the [PGM] button.
2. Dial “044”, Attendant Station Program code.
3. Dial the desired station range, for a single station, enter an “*” in place of the second
station number.
4. Dial 2-digit hour and 2-digit minute for alerting.
5. For a daily (repeating alarm), dial “#”.
6. Press [SAVE] button.
To erase Wake-Up
1. Press the [PGM] button.
2. Dial “045”, the Attendant Station Program code.
3. Dial the desired station range, for a single station, enter an “*” in place of the second
station number.
4. Press [SAVE] button.
iPECS Phone
To register Wake-Up
1. Press the [PGM] button.
2. Dial “41”, the set Wake-up code.
3. Dial 2-digit hour and 2-digit minute for alerting.
4. For a daily (repeating alarm), dial “#”.
5. Press [SAVE] button.
To stop the alarm notification
1. Lift the handset or press [SPEAKER].
To erase Wake-Up
1. Press the [PGM] button.
2. Dial “42”, the erase Wake-up code.
3. Press [SAVE] button.
SLT
To register Wake-Up
1. Lift the handset.
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “41”, the set Wake-up code.