Ericsson iPECS-100 - 3.2 INTERCOM CALL (ICM CALL)

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
220
2.73.9 Message Cascade
Description
Message cascading is a feature that copies messages left for the originating mailbox to another
mailbox. Once the message is copied into the other mailbox, notification events can take place
based on that mailbox settings.
Operation
A mailbox has a cascade field in administration. That field is another mailbox number.
A mailbox has a cascade field type in administration. One of the following types may be
selected:
 Disable - Disable this function.
 Copy-Immediately – Copy (Cascading) begins immediately, allowing storage
of duplicate messages in several mailboxes.
 Copy-Urgent Only – Copy (Cascades) only those messages marked urgent.
 Move-Immediately – Move (Cascading) begins immediately, allowing
storage of duplicate messages in several mailboxes.
 Move-Urgent Only – Move (Cascades) only those messages marked urgent.
Conditions
1. A mailbox can only have 1 cascade mailbox destination.
2. Mailbox messages are retained in each mailbox.
Programming
 Station Attribute (PGM 127):
 Cascade Mailbox: mailbox number
 Cascade type: Disable / Copy-Immediately /Copy-Urgent / Move-
Immediately /Move-Urgent
Related Features
Hardware
2.73.10 Class of Service Settings
Description
The system shall provide administrative options to create COS. These COS can then be
assigned to stations/mailboxes on an individual basis. This will allow these parameters.
Operation
The system shall provide 5 COS settings 1-5.
Each COS has the following items that can be programmed: