Ericsson iPECS-100 - Intercom Caller Controlled ICM Signaling

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
255
3.4 INTERCOM CALLER CONTROLLED ICM SIGNALING
Description
A user can change the signaling mode of an Intercom call from Tone ring to Voice announce or
Voice announce to Tone ring.
Operation
iPECS Phone
To change the ICM Signaling mode;
1. Place intercom call.
2. Dial “#”, ICM Signaling mode will change from Voice announce to Tone ring or Tone
ring to Voice announce.
SLT
To change the ICM Signaling mode;
1. Place intercom call as normal.
2. Dial “#”, ICM Signaling mode will change from Voice announce to Tone ring or Tone
ring to Voice announce.
Conditions
1. The ICM Signaling mode cannot be changed when an Intercom call is placed to a
Linked Pair station.
2. If the signaling mode is changed, the call is not subject to Call Forward, No Answer.
3. The signaling mode for a specific Intercom call can only be changed once and
cannot be changed back to the original signaling mode.
4. Changing the signaling mode does not affect privacy at the called station.
Programming
STATION 1 Caller Controlled ICM Signaling (PGM 111-Btn 15)
Related Features
 Intercom Signaling Mode
 Linked Station Pairs
Hardware