Ericsson iPECS-100 - 2.1 ACCOUNT CODE

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
4
2. SYSTEM
2.1 ACCOUNT CODE
Description
Station users may allow tracking of specific calls by entering a non-verified variable length (up
to 12 digits) identifier for a call. The identifier or “Account Code” is output as part of the Station
Message Detail Record (SMDR) for the call.
Operation
iPECS Phone
To assign a Flex button for {ACCOUNT CODE} operation:
{ACCOUNT CODE} button: [PGM] + {FLEX} + [PGM] + “84” + [SAVE]
{ONE-TOUCH ACCOUNT CODE} button: [PGM] + {FLEX} + [PGM] + “84” + Account code
(up to 12 digits) + [SAVE]
To enter an Account Code using an {ACCOUNT CODE} button prior to placing a call:
1. Lift the handset.
2. Press the {ACCOUNT CODE} button.
3. Dial the Account Code (1 to 12 digits).
4. Press “*”, Intercom dial tone is heard.
5. Place the CO/IP call as normal.
Or,
6. Lift the handset or press the [SPEAKER] button.
7. Press the {ONE-TOUCH ACCOUNT CODE} button.
8. Place the CO/IP call as normal.
To enter an Account Code using an {ACCOUNT CODE} button during a call:
1. Press the {ACCOUNT CODE} button.
2. Dial the Account Code (1 to 12 digits).
3. Press “*”.
Or,
1. Press the {ONE-TOUCH ACCOUNT CODE} button.
SLT
To enter an Account Code prior to placing a call:
1. Lift the handset.
2. Dial Flex Numbering Plan code “550”.
3. Dial the Account Code (1 to 12 digits).
4. Press “*”.
5. Place the CO/IP call as normal.
To enter an Account Code during a call:
1. Momentarily press the Hook-switch.