iPECS-LIK
Feature Description & Operation Manual
8.4
CALL ANSWER
Description
A SIP Phone will accept a call when it receives call on idle state.
On busy state, it is different according to ‘Call Wait’ supported or not.
Operation
Receives 1
st
call on Idle State
1. Accept the call and respond with Ringing.
2. Pickup Handset to answer the call.
Receives 2
nd
call on Busy State
1. If do not support Call Wait or disabled.
2. Reject the call by ‘486’ busy.
3. If support Call Wait and enabled.
4. Accept the call and respond with Ringing.
5. The call is waited on the SIP Phone.
6. SIP Phone will serve self indication for the second call.
Handsfree Automatic Answer
1. By SIP Phone : self programmable option, always
2. By System : in case of receiving call by Voice Over, Intrusion, Forced Handsfree,
Paging
− Ericsson-LG Enterprise SIP Phone only supported
Conditions
Programming
Related Features
Hardware
To Next Page
Loading...