Ericsson iPECS-100 - Remote Device Zone Management

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
232
2.77 REMOTE DEVICE ZONE MANAGEMENT
Description
Remote devices, in particular those not reachable by the system, are managed by grouping
devices by various characteristics in a Zone. Placing devices into Zones simplifies
management allowing definition of common characteristics to the devices within the zone. Zone
attributes include:
 Nation code
 Language
 Page area
 Time-zone, GMT or system
 Holiday ring modes
 RTP relay
 RTP Relay group.
Operation
Zone operation is automatic once configured.
Conditions
1. Zone attributes which may affect ringing, such as Holiday and Vacation settings,
have lower priority than other ring assignments such as Tenancy group ring mode
established for DID lines.
2. Zone Attributes do not provide adjustment of time for DST.
3. It is recommended to assign CO/IP lines and stations of a Tenant group in the same
Device Zone.
4. Wake-up time is based on the time displayed in the station’s LCD.
Programming
ZONE DATA
1
Device Zone Number (PGM436-Web only)
2
Device Zone Attributes (PGM 437-Web Only)
3
Zone Access & Page Relay (PGM 438-Web only)
4
Zone Attributes (PGM 439-Web only)
5
Zone RTP Relay Group (PGM 440-Web only)
6
Inter-zone Attributes (PGM 441-Web only)
Related Features
7
Zone Holiday Assignment (PGM 444)
 Centralized Control TNET
Hardware