Ericsson iPECS-100 - Slt Name Entry

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
381
7.4 SLT NAME ENTRY
Description
A SLT user has the capability to program the user name so that a calling user with an LCD can
see the name instead of the station number.
Operation
SLT
To register the name at the SLT
1. Lift the handset.
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “74”, the SLT Name Program Code.
4. Enter name, refer to Station Speed Dial, Alphanumeric Chart.
5. Momentarily depress the hook-switch, receive confirmation tone.
To delete the name at the SLT;
1. Lift the handset.
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “74”, the SLT Name Program Code.
4. Momentarily depress the hook-switch, receive confirmation tone.
Conditions
Programming
Related Features
 Dial-by-Name
 Station Speed Dial
Hardware