Ericsson iPECS-100 - Auto Service Mode Control; Direct Inward System Access (DISA)

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
39
2.8 AUTO SERVICE MODE CONTROL
Description
The service mode defines different ring assignments, COS and answering privileges for the
system. The service mode can be controlled automatically through definitions in the Auto Ring
Mode Selection Table, which defines the time of day for the Day, Night and Timed shift modes.
The Attendant may change the system mode selection from automatic to manual.
Operation
System
Operation of this feature is automatic.
Conditions
Programming
STATION
1
Station COS (PGM 116)
CO/IP
1
CO/IP CO Ring Assignment (PGM 144)
2
CO COS (PGM 141-Btn 2)
SYSTEM
1
DISA COS (PGM 166)
2
External Control Contact (PGM 168)
3
PBX Trunk Access Codes (PGM 172)
4
LD Digit Count (PGM 177-Btn 3)
5
LD Digit Code (PGM 177-Btn 19)
TABLES
1
Toll Restriction (PGM 224)
2
Authorization Codes Table (PGM 227)
Related Features
3
Auto Ring Mode Selection Table (PGM 233)
 Off-Hook Signaling
 Authorization Codes (Password)
 Direct Inward System Access (DISA)
 Day/Night/Timed/Scenario Ring Mode
 System Clock Set
 CO/IP Ring Assignment
 LBC (Loud Bell Control)
 Dialing Restrictions
Hardware