iPECS-LIK
Feature Description & Operation Manual
4.
CO/IP
4.1 AUTO FAULT DETECTION AND RECOVERY
Description
If a CO line fault is reported from a PRI/VoIP/SIP gateway, the iPECS places the CO Line in an
Out-Of-Service state and places it in the Unused CO/IP Group. Upon receiving the CO Line
recovery report, the CO Line is automatically restored. The fault is also reported to the iPECS
NMS when configured.
Operation
System
Operation of Fault Detection and Recovery is automatic.
Conditions
1. The “Unused” CO Group contains CO line numbers that are not used or are
temporally blocked.
Programming
CO/IP 1 CO Line Group (PGM 141-Btn 1)
Related Features
CO/IP Line Groups
Hardware
To Next Page
Loading...