Ericsson iPECS-100 - Serial Dss

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
347
5.29 SERIAL DSS
Description
LIP-8000 keyset supports Serial DSS to be connected through serial cable.
There are 3 types of serial DSS ; 12 button Serial DSS(LIP-8012DSS), 12 button Serial DSS
with LCD(LIP-8012LSS), 48 button Serial DSS(LIP-8048DSS).
Operation
Connecting Serial DSS to LIP-8000 keyset
1. Check the station have the authority to use serial DSS in Admin.
2. Check the serial DSS power is off (only for LIP-8048DSS).
3. Power off the LIP-8000 keyset.
4. Connect serial DSS to keyset through serial cable.
5. Power on the DSS (only for LIP-8048DSS).
6. Power on the keyset.
7. Program DSS button on station program by pressing [PGM] + Flex button.
Or, program DSS button from web “Flexible button PGM” menu.
Editing LSS Labe
1. After connecting serial LSS, enter ADM 129 and enter serial dss order and desired
button number.
2. Edit Label string according to flex button feature.
3. If Label is saved and Flex button is programmed, the label string is displayed in the
flex button field.
Conditions
1. Total number of Serial DSS per a system is limited. Refer the table below. Above
limitation includes Hot-desk Agent stations.
System
Max. number of Serial DSS
Max. number of LSS
iPECS-50
50
40
iPECS-100
50
40
iPECS-300
100
60
iPECS-600
200
80
iPECS-1200
200
80
2. LIP-8004D doesn’t support serial DSS.
3. Maximum 4 serial DSS boxes can be connected to one keyset.
4. LIP-8048DSS is powered by external adaptor, but others cannot use external
adaptor. They should be powered from keyset or LIP-8048 DSS.