iPECS-LIK
Feature Description & Operation Manual
5. LIP-8000 keyset can supply power to maximum two DSS. For this, the keyset
should use external adaptor. And LIP-8048 DSS also can supply power to
maximum two DSS.
6. Linked pair Slave station cannot use the serial DSS.
7. If LSS label is not programmed, MFIM gives the default name of LSS feature.
8. If ICM number is programmed to LSS and the label is not programmed,
destination station name is displayed. If the station doesn’t have its name,
STAXXX is displayed by default.
9. If Speed number is programmed to LSS and the label is not programmed, the
Speed name is displayed. If the Speed bin doesn’t have its name, SPDXXX is
displayed by default.
10. When program DSS button feature of Label, 1st DSS starts from button 49, 2nd
DSS starts from button 97, 3rd DSS starts from button 145, 4th DSS starts from
button 193.
11. When using keyset admin serial DSS buttons don’t work.
12. To program DSS button using keyset admin, press the [VOLUME UP/DOWN]
button to scroll flexible button number index.
13. When DSS configuration is changed, the initial value of 48Btn DSS is as same as
initial value of DSS map1 ~ map4, 12BTN DSS and 12BTN LSS doesn’t have
initial values.
14. If DSS configuration is changed and the phone restarts, programmed DSS data is
initialized from the changed DSS.
15. To Control LSS contrast, press the [VOLUME UP/DOWN] button in idle state.
DSS contrast is changed with keyset LCD.
16. Once after serial DSS is connected to LIP-8000, the configuration DB is saved
until different type of serial DSS is connected to the station.
17. System Max. number of Serial DSS Max. number of LSS
18. Each station can have serial DSS usage authority option. If disabled, serial DSS
configuration of the station is initialized and DSS is not installed to that station.
Programming
STATION 1 Serial DSS Usage (PGM 111 –Btn21)
2 Flex Button Assign (PGM 115)
3 Serial LSS Label Edit (PGM 129)
Related Features
Hardware
To Next Page
Loading...