iPECS-LIK
Feature Description & Operation Manual
6.
ATTENDANTS
6.1 ACTIVE CPU (MFIM) DISPLAY
Description
When the system is equipped for CPU Redundancy, the System Attendant can determine and
change the active and standby CPU.
Operation
System Attendant
To view the active MFIM
1. Press the [PGM] button.
2. Dial “078” the Attendant Station Program code, the active CPU is displayed.
To Change Standby MFIM to Active MFIM
1. Press the [PGM] button.
2. Dial “078” the Attendant Station Program code.
3. Dial “#” to change standby MFIM to active MFIM.
Conditions
1. The system must be equipped with and properly programmed (PGM 161) for
Redundant Processor operation for the Attendant to display or change the active
MFIM.
2. The System Attendant can assign a Flex button to indicate when the back-up MFIM
is active. When the Flex button is assigned as (PGM 078) the LED of the flex button
will turn on indicating the back-up MFIM is active.
Programming
SYSTEM 1 CPU Redundancy Use (PGM 161-Btn 20)
Related Features
Redundant System Processor
Hardware
To Next Page
Loading...