iPECS-LIK
Feature Description & Operation Manual
Conditions
1. The transferring station may camp a call on to a busy station.
2. The LED of a {LOOP} or {POOL} button will display the status of a call until the
station no longer has call supervision i.e.; the call is successfully transferred.
3. To prevent Toll abuse, CO/IP lines without an active call (either incoming or dialed
digits on outgoing) cannot be transferred.
4. For outgoing CO Line calls, the system will monitor the CO Line for dial tone to
prevent Toll abuse. When an IP Line is seized, the system does not monitor for
dial tone.
Programming
STATION 1 No Touch Answer (PGM 111-Btn 6)
SYSTEM 1 Transfer Recall Timer (PGM 180-Btn 7)
Related Features
Hold Recall
Call Transfer, CO/IP
Call Waiting/Camp-On
Station Flexible Buttons
Hardware
2.17.2 Call Transfer, CO/IP
Description
A station may be permitted to transfer a CO/IP call to another CO/IP line, establishing an
Unsupervised Conference between the two external parties.
If the receiving party is called through an ISDN or VoIP path, the Transfer Hold Recall Timer is
initiated and if it expires, Hold Recall is initiated.
Operation
iPECS Phone
While on a CO/IP call, Screened Call Transfer
1. Press [TRANS] button.
2. Place CO/IP call in normal manner.
3. At answer, announce the call.
4. Hang-up to complete the transfer.
While on a CO/IP call, Unscreened Call Transfer
1. Press [TRANS] button.
2. Place CO/IP call in normal manner.
3. Hang-up to complete the transfer.
To Next Page
Loading...